The development of the plastic&tyre pyrolysis

With the development of the auto industry,more and more rubber products are produced such as tyres and rubber products.when we are enjoying the convenience the rubber products brings we also have to face the pollution that the waste rubber products brings.More and more waste rubber products generated day by day.And the amount of the waste rubber products is also increasing faster and faster .The pyrolysis technology is also developing. At the beginning of the technology the procedure is very rough.The pyrolysis may cause pollution to the environment and the oil yield is very low.And we have not the appropriate catalyst to improve the oil yield rate.

Now the technology is developing very fast,With years experience and research we have mature technology with well-equipped equipment with exact control about the pressure and temperature,what is more we have developed our catalyst.Now we control the temperature of the reactor and the pressure exactly to have a high oil yield rate,what is more we have special designed catalyst.

Now the pyrolysis is achieved by large scale equipment named pyrolysis plant,The pyrolysis plant will convert the waste tyre&plastic to fuel oil with little pollution.According to a survey published the pyrolysis plant can deal well with the waste gas,waste dust,and so on.So the pyrolysis plant is non-pollution to the environment.The pyrolysis plant for henan doing mechanical equipment co,ltd is designed to use little external energy.The nature gas is only used in the beginning when the plant operates,once the machine starts,the pyrolysis plant will use its own off-gas to heat the reactor.The off-gas produced can be recycled.And the water which is used to cool the oil gas is also recycled.The water in a non-contact closed loop.The water is not in contact with the process itself.So the water is clean.And we will add some chemical compounds to make the plastic full combustion to reduce coking.

The pyrolysis plant nowadays has reasonable and artful structure,energy saving and no environment pollution,sufficient combustion and wide application range.

plastic to fuel equipment which converts old plastic to clear energy

The plastic to fuel technology for Henan doing is capable of producing a wide range of quality fuels from waste plastic feedstocks including HDPE LDPE and PP and so on.The technology is mainly to convert the waste plastic such as home plastic,industry plastic etc, into the clear energy by green methods. Established the machine in the local all over the world,The plastic to fuel technology and the plastic to fuel plant which converts the waste plastic to fuel without any pollution has proven that the process of waste conversion is stable and efficient in the suitable environment.

Then we will have a generation introduction and the developing the of the pyrolysis plant.

The pyrolysis plant is used to convert the waste plastic.tyre to crude oil for fuel.The raw material of the pyrolysis plant can be waste plastic/tyre,and the final product of the pyrolysis plant is carbon black,steel wire and crude oil.The crude oil is the mainly and most important final product of the pyrolysis machine.When the raw material of the pyrolysis plant such as waste tyre or waste plastic is heated they will vaporize into gas,It is called oil gas.Then the oil gas will be condensed into liquid in the condensor.Then we collect the liquid oil.The crude oil can be used in heavy industries as heat fuel.In this step the oil can not be used in truck or diesel engine.When further refined, we can extract diesel from the tyre/plastic oil.

The pyrolysis plant is environmental friendly machine.
Little energy is required to run the machine,The nature gas is only used when the plant starts,once the plant is running the plant will use its own gas to heat the reactor.Well-designed dedusting system will remove the dust well,Then there will no waste gas or waste dust to the environmental.
The water is only used to cool the oil gas and the water id recycled.The water is in a non-contact closed loop.The water is not in contact with the pyrolysis plant itself,keeping it clean and uncontaminated.
Approximately 2-4% of the resulting product is petcoke(carbon black),a high quality fuel.
The pressure of our doing brand pyrolysis plant is atmosphere pressure,The 5th generation pyrolysis plant we design has a vacuum system which will make all the system safe.

pyrolysis plant converts plastic to fuel

we are henna doing mechanical equipment co.ltd.we are professional manufacturer and supplier of pyrolysis plant which converts plastic to fuel equipment.As we have done research in the plastic to fuel technology since 2005.we have proven that the equipment of t

Then we will have a generation introduction and the developing the of the plastic to fuel processor.

 high quality pyrolysis plant of henan doing 

The core technology of the plastic to oil recycling processor is the process vessel with the ability to handle the accordingly amount of mixed polymer waste plastics that other recycling systems have to discard in landfills. This is the advantage of our plastic to oil recycling machine.

添加图片说明

On the other side the equipment which is stylish designed by us can utilize lightly sorted and unwashed polymer stream, this design makes preparations of materials of less labor and capital intensive for operators. During the process of converting the waste to fuel oil. The process deconstruct hydrocarbon based materials, such as end life plastic and rubber, and converts it into new molecular structures that can be made into fuel such as crude oil which can be used as transportation fuels as well as raw material for new polymer production.

Then the resulting product is processed using equipment that consists of various distillation and treatment stages that separate the liquid output into a variety of market ready fuel and aromatic components.

The final product of the process is a kind of light, sweet liquid known as pygas which can be sold directly or further processed into diesel oil. And the by-product of the production include an inert char and a light non-condensable off-gas, the off gas will not pollute the environment for it can be used to heat the reactor itself. Thus minimal energy is required to run the reactor. So the reactor is energy-saving and clear.

We continue pursuing improving the efficient of the plastic to oil equipment and the quality of the crude oil generated.and try our best to reduce of the cost of the plastic to oil machine.we believe in the future the profits that the equipment brings will exceed your expections.

waste tyre pyrolysis plant

we are henna doing mechanical equipment co.ltd.we are professional manufacturer and supplier of plastic to fuel equipment.As we have done research in the plastic to fuel technology since 2005.we have proven that the plastic to oil equipment is efficient and stable.

Then we will have a generation introduction and the developing the of the plastic to fuel processor.

The core technology of the plastic to fuel recycling processor is the process vessel with the ability to handle the accordingly amount of mixed polymer waste plastics that other recycling systems have to discard in landfills. This is the advantage of our plastic to oil recycling machine.

On the other side the equipment which is stylish designed by us can utilize lightly sorted and unwashed polymer stream, this design makes preparations of materials of less labor and capital intensive for operators. During the process of converting the waste to fuel oil. The process deconstruct hydrocarbon based materials, such as end life plastic and rubber, and converts it into new molecular structures that can be made into fuel such as crude oil which can be used as transportation fuels as well as raw material for new polymer production.

Then the resulting product is processed using equipment that consists of various distillation and treatment stages that separate the liquid output into a variety of market ready fuel and aromatic components.

The final product of the pyrolysis plant is a kind of light, sweet liquid known as pygas which can be sold directly or further processed into diesel oil. And the by-product of the production include an inert char and a light non-condensable off-gas, the off gas will not pollute the environment for it can be used to heat the reactor itself. Thus minimal energy is required to run the reactor. So the reactor is energy-saving and clear.

www.wastetireoil.com

We continue pursuing improving the efficient of the plastic to oil equipment and the quality of the crude oil generated.and try our best to reduce of the cost of the plastic to oil machine.we believe in the future the profits that the equipment brings will exceed your expections.