The development of the plastic&tyre pyrolysis

With the development of the auto industry,more and more rubber products are produced such as tyres and rubber products.when we are enjoying the convenience the rubber products brings we also have to face the pollution that the waste rubber products brings.More and more waste rubber products generated day by day.And the amount of the waste rubber products is also increasing faster and faster .The pyrolysis technology is also developing. At the beginning of the technology the procedure is very rough.The pyrolysis may cause pollution to the environment and the oil yield is very low.And we have not the appropriate catalyst to improve the oil yield rate.

Now the technology is developing very fast,With years experience and research we have mature technology with well-equipped equipment with exact control about the pressure and temperature,what is more we have developed our catalyst.Now we control the temperature of the reactor and the pressure exactly to have a high oil yield rate,what is more we have special designed catalyst.

Now the pyrolysis is achieved by large scale equipment named pyrolysis plant,The pyrolysis plant will convert the waste tyre&plastic to fuel oil with little pollution.According to a survey published the pyrolysis plant can deal well with the waste gas,waste dust,and so on.So the pyrolysis plant is non-pollution to the environment.The pyrolysis plant for henan doing mechanical equipment co,ltd is designed to use little external energy.The nature gas is only used in the beginning when the plant operates,once the machine starts,the pyrolysis plant will use its own off-gas to heat the reactor.The off-gas produced can be recycled.And the water which is used to cool the oil gas is also recycled.The water in a non-contact closed loop.The water is not in contact with the process itself.So the water is clean.And we will add some chemical compounds to make the plastic full combustion to reduce coking.

The pyrolysis plant nowadays has reasonable and artful structure,energy saving and no environment pollution,sufficient combustion and wide application range.

plastic to fuel equipment which converts old plastic to clear energy

The plastic to fuel technology for Henan doing is capable of producing a wide range of quality fuels from waste plastic feedstocks including HDPE LDPE and PP and so on.The technology is mainly to convert the waste plastic such as home plastic,industry plastic etc, into the clear energy by green methods. Established the machine in the local all over the world,The plastic to fuel technology and the plastic to fuel plant which converts the waste plastic to fuel without any pollution has proven that the process of waste conversion is stable and efficient in the suitable environment.

Then we will have a generation introduction and the developing the of the pyrolysis plant.

The pyrolysis plant is used to convert the waste plastic.tyre to crude oil for fuel.The raw material of the pyrolysis plant can be waste plastic/tyre,and the final product of the pyrolysis plant is carbon black,steel wire and crude oil.The crude oil is the mainly and most important final product of the pyrolysis machine.When the raw material of the pyrolysis plant such as waste tyre or waste plastic is heated they will vaporize into gas,It is called oil gas.Then the oil gas will be condensed into liquid in the condensor.Then we collect the liquid oil.The crude oil can be used in heavy industries as heat fuel.In this step the oil can not be used in truck or diesel engine.When further refined, we can extract diesel from the tyre/plastic oil.

The pyrolysis plant is environmental friendly machine.
Little energy is required to run the machine,The nature gas is only used when the plant starts,once the plant is running the plant will use its own gas to heat the reactor.Well-designed dedusting system will remove the dust well,Then there will no waste gas or waste dust to the environmental.
The water is only used to cool the oil gas and the water id recycled.The water is in a non-contact closed loop.The water is not in contact with the pyrolysis plant itself,keeping it clean and uncontaminated.
Approximately 2-4% of the resulting product is petcoke(carbon black),a high quality fuel.
The pressure of our doing brand pyrolysis plant is atmosphere pressure,The 5th generation pyrolysis plant we design has a vacuum system which will make all the system safe.

pyrolysis plant converts plastic to fuel

we are henna doing mechanical equipment co.ltd.we are professional manufacturer and supplier of pyrolysis plant which converts plastic to fuel equipment.As we have done research in the plastic to fuel technology since 2005.we have proven that the equipment of t

Then we will have a generation introduction and the developing the of the plastic to fuel processor.

 high quality pyrolysis plant of henan doing 

The core technology of the plastic to oil recycling processor is the process vessel with the ability to handle the accordingly amount of mixed polymer waste plastics that other recycling systems have to discard in landfills. This is the advantage of our plastic to oil recycling machine.

添加图片说明

On the other side the equipment which is stylish designed by us can utilize lightly sorted and unwashed polymer stream, this design makes preparations of materials of less labor and capital intensive for operators. During the process of converting the waste to fuel oil. The process deconstruct hydrocarbon based materials, such as end life plastic and rubber, and converts it into new molecular structures that can be made into fuel such as crude oil which can be used as transportation fuels as well as raw material for new polymer production.

Then the resulting product is processed using equipment that consists of various distillation and treatment stages that separate the liquid output into a variety of market ready fuel and aromatic components.

The final product of the process is a kind of light, sweet liquid known as pygas which can be sold directly or further processed into diesel oil. And the by-product of the production include an inert char and a light non-condensable off-gas, the off gas will not pollute the environment for it can be used to heat the reactor itself. Thus minimal energy is required to run the reactor. So the reactor is energy-saving and clear.

We continue pursuing improving the efficient of the plastic to oil equipment and the quality of the crude oil generated.and try our best to reduce of the cost of the plastic to oil machine.we believe in the future the profits that the equipment brings will exceed your expections.

waste tyre pyrolysis plant

we are henna doing mechanical equipment co.ltd.we are professional manufacturer and supplier of plastic to fuel equipment.As we have done research in the plastic to fuel technology since 2005.we have proven that the plastic to oil equipment is efficient and stable.

Then we will have a generation introduction and the developing the of the plastic to fuel processor.

The core technology of the plastic to fuel recycling processor is the process vessel with the ability to handle the accordingly amount of mixed polymer waste plastics that other recycling systems have to discard in landfills. This is the advantage of our plastic to oil recycling machine.

On the other side the equipment which is stylish designed by us can utilize lightly sorted and unwashed polymer stream, this design makes preparations of materials of less labor and capital intensive for operators. During the process of converting the waste to fuel oil. The process deconstruct hydrocarbon based materials, such as end life plastic and rubber, and converts it into new molecular structures that can be made into fuel such as crude oil which can be used as transportation fuels as well as raw material for new polymer production.

Then the resulting product is processed using equipment that consists of various distillation and treatment stages that separate the liquid output into a variety of market ready fuel and aromatic components.

The final product of the pyrolysis plant is a kind of light, sweet liquid known as pygas which can be sold directly or further processed into diesel oil. And the by-product of the production include an inert char and a light non-condensable off-gas, the off gas will not pollute the environment for it can be used to heat the reactor itself. Thus minimal energy is required to run the reactor. So the reactor is energy-saving and clear.

www.wastetireoil.com

We continue pursuing improving the efficient of the plastic to oil equipment and the quality of the crude oil generated.and try our best to reduce of the cost of the plastic to oil machine.we believe in the future the profits that the equipment brings will exceed your expections.

tire recycling project report

Plastic disposal

Plastic disposal is necessary nowadays; waste plastic is produced more and more day by day so plastic disposal is more and more important nowadays. Traditional ways of waste plastic disposal is to burn or dump. That is not only a waste of energy but also may cause a great pollution to the environment. Now we got an advanced technology for plasticdisposal.

 Pyrolysis plant manufactured by Henan doing mechanical equipment co, ltd is a professional method for plastic disposal. This way we can convert waste plastic to crude oil which can be used for trucks, tractors, power generators and so on.

The plastic disposal technology for us is green and profitable. Pyrolysis is a thermochemical decomposition of organic material at elevated temperatures in the absence of oxygen (or any halogen) the pyrolysis plant for plastic disposal is mainly to convert plastic to oil.long chain ploymer chains in broken down into small smaller chains of hydrocarbon gas and pyrolysis oil. When the temperature is down then the oil gas will be cooled down into liquid oil.after further distillation the liquid oil will be converted into diesel oil. We are one of the professional leader manufacturer and supplier of pyrolysis plant for plastic disposal. With years of research and development we have a factory of 20000 square meters. Monthly production 20set.

Actually the pyrolysis plant is just a good way to deal with the waste plastic. We can convert the waste plastic/tire into crude oil as energy. And thus solving the problem of environment pollution. We have waste tire recycling machine, waste plastic recycling machine. Crude oil refining machine. Stable operation of the pyrolysis plant enables the high quality crude oil. Reasonable price, reliable operation,high quality crude oil make us gain huge reputation from our customers. after all. Pyrolysis for plastic disposal is a new way to deal with the waste plastic/tire.

General introduction of Plastic to oil pyrolysis plant of henan doing

The Challenge:

plastic to fuel plant

waste plastic to fuel plant

The plastic industry is one of the world's largest consumers of oil; over five million barrels a day are used in the creation of hundreds of different polymers for consumers and industry. Cheap, light weight and extremely versatile, plastics have found their way into almost every product imaginable. These products are often designed for single use, will usually be disposed of to landfill along with other domestic and commercial wastes. Despite increased recycling efforts, we still incinerate more plastic than we recycle and even then 80% of the world's plastic still ends up going to landfill. 

We, Henan doing mechanical equipment are trying to find sustainable long term solutions to their waste management problems. We are looking for a technology which can convert the waste plastic to high quality oil for fuel. Although some of the easier to recycle and in demand polymers such as polyethylene and PET are baled and usually sent to the Far East for cheap processing, many other plastics such as silage wrap, multi layer films or laminates, contaminated plastics, industrial waste and the residual plastic waste from previous recycling operations are destined for landfill. There is currently no alternative sustainable use for these mixed waste plastics and considering the amount of oil contained within them, there exists a significant opportunity on a global scale to recover this value. So nowdays, the waste plastic nowadays not only pollute the environment but also caused a waste of energy. Now we Henan doing mechanical equipment co,ltd  discover  a technology can convert the waste plastic or waste tire to crude oil for fuel. The technology is called pyrolysis.The plastic to oil recycling plant

The Solution:

pyrolysis plant for Henan doing  is a part of the doing  Group of Companies which designs and develops facilities that convert waste plastics into high grade oils. The plastic to oil recycling machine uses a continuous liquid faction technology that indirectly heats the plastic waste and a unique catalytic reaction to generate hydrocarbon gases which are then cooled and condensed to produce ASTM spec diesel as well as a proprietary blend of heating fuel. These oils not only exceed regulatory standards, but can be used in any diesel engines, trucks, buses, trains, boats, heavy equipment and generators with no engine modification. A plastic to oil recycling pyrolysis plant can produce approximately 950 liters of high grade diesel fuel from each tone of waste plastic. Different polymers can be processed together in the same reactor without any sorting and typical contaminants such as grit, paper, metal, food residue and oils do not need to be removed before treatment. The advanced system has the capability to take high loads of PVC and PET along with the ideal polyolefin plastics without damaging the reactor or producing unacceptably high emissions. 

The plastic to oil recycling  pyrolysis plant  technology of Henan doing technology, has been in commercial operation for over twenty years and there are now dozens of reference facilities that have the capacity of producing fuels at a rate of over five hundred liters per hour. Klein’s distillate fuel is not only greener than virgin fuels, due to its reduced carbon footprint, but it is also a superior product due to its cleaner burning properties and high certain rating. So the plastic to oil recycling plant is not only of great beneficial to the environment it is also of great beneficial to the humans’ health.

Henan doing mechanical equipment co.ltd is planning to establish ourselves as the leader of plastic to oil recycling manufacturer. Trader and supplier, which the company claims will not only be low impact visually but also environmentally, as emissions levels are just a fraction of those permitted. The company already has agreements to sell fuel products locally.
Our new reactors of the plastic to oil recycling pyrolysis plant are more proven, energy efficient and inherently safer than traditional process equipment, but have low operational costs and minimal maintenance. Doing company plans to establish up to fifteen similar facilities all over the world and Europe and is actively discussing opportunities with a number of organizations who currently dispose of large volumes of plastic suitable to the our pyrolysisFuel process on an own and operate, joint venture and partnership basis. 

The 5^th improved Pyrolysis plant

Technology is advancing with the development the environment. pyrolysis plnat is a machine converts wasteplastic to oil. It is a          in the absence of hydrocarbon. So we will introduce the difference from the 1th generation pyrolysis plant to 5^th generation pyprolysis plant.

With the development of the environment and economics. There is a higher stand about environment protection. And we are in eager demand of energy. We improved the technology of our pyrolysis plant to meet the demand of the environment, relieve the lack of the energy in the world. Higher yield of oil output and more serious environmental pollution is the two main key of the improved 5^th generation pyrolysis plant.

Higher output of oil: the 4^th generation pyrolysis plant has about a 45 squares area of condensing. The condense of the area are limited. While improved, we enlarge the area of condensing. The oil yield output is higher and more quality. The oil is more purifier.There are total 57 condensers pipes in the condenser with an diameter 14mm.The condense pipe will enlarge the condensing area and the contact area between the oil gas and cooling water.

More environmental friendly:the waste oil gas which can not be condensed will be collected and recycled back to heat the reactor.Take the 10T plastic pyrolysis plant for example,we can save 45% energy available.And the dedusting system will remove the waste gas,waste solid.And specilized design for carbon black collecting system will deal with the carbon black well without any solid pollution to the environment.what is more the discard is collected well which the waste plastic or waste Tyre generated.Sealing all the details well thus avoid gas leak and smelly.

Then the safety of the pyrolysis plant is very important.The 5th generation plastic to oil pyrolysis plant is safer compared with before.Reactor with auto welding avoid direct heat.Indirect heat will be sager and decrease the rate to happen accident. The new designed vacuum system will prevent the oil gas being back to cause accident.

Generally speaking,compared with the pyrolysis plant befor The 5th generation pyrolysis plant is more environmental friendly,safer,and energy saving.