tire recycling project report

Plastic disposal

Plastic disposal is necessary nowadays; waste plastic is produced more and more day by day so plastic disposal is more and more important nowadays. Traditional ways of waste plastic disposal is to burn or dump. That is not only a waste of energy but also may cause a great pollution to the environment. Now we got an advanced technology for plasticdisposal.

 Pyrolysis plant manufactured by Henan doing mechanical equipment co, ltd is a professional method for plastic disposal. This way we can convert waste plastic to crude oil which can be used for trucks, tractors, power generators and so on.

The plastic disposal technology for us is green and profitable. Pyrolysis is a thermochemical decomposition of organic material at elevated temperatures in the absence of oxygen (or any halogen) the pyrolysis plant for plastic disposal is mainly to convert plastic to oil.long chain ploymer chains in broken down into small smaller chains of hydrocarbon gas and pyrolysis oil. When the temperature is down then the oil gas will be cooled down into liquid oil.after further distillation the liquid oil will be converted into diesel oil. We are one of the professional leader manufacturer and supplier of pyrolysis plant for plastic disposal. With years of research and development we have a factory of 20000 square meters. Monthly production 20set.

Actually the pyrolysis plant is just a good way to deal with the waste plastic. We can convert the waste plastic/tire into crude oil as energy. And thus solving the problem of environment pollution. We have waste tire recycling machine, waste plastic recycling machine. Crude oil refining machine. Stable operation of the pyrolysis plant enables the high quality crude oil. Reasonable price, reliable operation,high quality crude oil make us gain huge reputation from our customers. after all. Pyrolysis for plastic disposal is a new way to deal with the waste plastic/tire.

General introduction of Plastic to oil pyrolysis plant of henan doing

The Challenge:

plastic to fuel plant

waste plastic to fuel plant

The plastic industry is one of the world's largest consumers of oil; over five million barrels a day are used in the creation of hundreds of different polymers for consumers and industry. Cheap, light weight and extremely versatile, plastics have found their way into almost every product imaginable. These products are often designed for single use, will usually be disposed of to landfill along with other domestic and commercial wastes. Despite increased recycling efforts, we still incinerate more plastic than we recycle and even then 80% of the world's plastic still ends up going to landfill. 

We, Henan doing mechanical equipment are trying to find sustainable long term solutions to their waste management problems. We are looking for a technology which can convert the waste plastic to high quality oil for fuel. Although some of the easier to recycle and in demand polymers such as polyethylene and PET are baled and usually sent to the Far East for cheap processing, many other plastics such as silage wrap, multi layer films or laminates, contaminated plastics, industrial waste and the residual plastic waste from previous recycling operations are destined for landfill. There is currently no alternative sustainable use for these mixed waste plastics and considering the amount of oil contained within them, there exists a significant opportunity on a global scale to recover this value. So nowdays, the waste plastic nowadays not only pollute the environment but also caused a waste of energy. Now we Henan doing mechanical equipment co,ltd  discover  a technology can convert the waste plastic or waste tire to crude oil for fuel. The technology is called pyrolysis.The plastic to oil recycling plant

The Solution:

pyrolysis plant for Henan doing  is a part of the doing  Group of Companies which designs and develops facilities that convert waste plastics into high grade oils. The plastic to oil recycling machine uses a continuous liquid faction technology that indirectly heats the plastic waste and a unique catalytic reaction to generate hydrocarbon gases which are then cooled and condensed to produce ASTM spec diesel as well as a proprietary blend of heating fuel. These oils not only exceed regulatory standards, but can be used in any diesel engines, trucks, buses, trains, boats, heavy equipment and generators with no engine modification. A plastic to oil recycling pyrolysis plant can produce approximately 950 liters of high grade diesel fuel from each tone of waste plastic. Different polymers can be processed together in the same reactor without any sorting and typical contaminants such as grit, paper, metal, food residue and oils do not need to be removed before treatment. The advanced system has the capability to take high loads of PVC and PET along with the ideal polyolefin plastics without damaging the reactor or producing unacceptably high emissions. 

The plastic to oil recycling  pyrolysis plant  technology of Henan doing technology, has been in commercial operation for over twenty years and there are now dozens of reference facilities that have the capacity of producing fuels at a rate of over five hundred liters per hour. Klein’s distillate fuel is not only greener than virgin fuels, due to its reduced carbon footprint, but it is also a superior product due to its cleaner burning properties and high certain rating. So the plastic to oil recycling plant is not only of great beneficial to the environment it is also of great beneficial to the humans’ health.

Henan doing mechanical equipment co.ltd is planning to establish ourselves as the leader of plastic to oil recycling manufacturer. Trader and supplier, which the company claims will not only be low impact visually but also environmentally, as emissions levels are just a fraction of those permitted. The company already has agreements to sell fuel products locally.
Our new reactors of the plastic to oil recycling pyrolysis plant are more proven, energy efficient and inherently safer than traditional process equipment, but have low operational costs and minimal maintenance. Doing company plans to establish up to fifteen similar facilities all over the world and Europe and is actively discussing opportunities with a number of organizations who currently dispose of large volumes of plastic suitable to the our pyrolysisFuel process on an own and operate, joint venture and partnership basis. 

The 5^th improved Pyrolysis plant

Technology is advancing with the development the environment. pyrolysis plnat is a machine converts wasteplastic to oil. It is a          in the absence of hydrocarbon. So we will introduce the difference from the 1th generation pyrolysis plant to 5^th generation pyprolysis plant.

With the development of the environment and economics. There is a higher stand about environment protection. And we are in eager demand of energy. We improved the technology of our pyrolysis plant to meet the demand of the environment, relieve the lack of the energy in the world. Higher yield of oil output and more serious environmental pollution is the two main key of the improved 5^th generation pyrolysis plant.

Higher output of oil: the 4^th generation pyrolysis plant has about a 45 squares area of condensing. The condense of the area are limited. While improved, we enlarge the area of condensing. The oil yield output is higher and more quality. The oil is more purifier.There are total 57 condensers pipes in the condenser with an diameter 14mm.The condense pipe will enlarge the condensing area and the contact area between the oil gas and cooling water.

More environmental friendly:the waste oil gas which can not be condensed will be collected and recycled back to heat the reactor.Take the 10T plastic pyrolysis plant for example,we can save 45% energy available.And the dedusting system will remove the waste gas,waste solid.And specilized design for carbon black collecting system will deal with the carbon black well without any solid pollution to the environment.what is more the discard is collected well which the waste plastic or waste Tyre generated.Sealing all the details well thus avoid gas leak and smelly.

Then the safety of the pyrolysis plant is very important.The 5th generation plastic to oil pyrolysis plant is safer compared with before.Reactor with auto welding avoid direct heat.Indirect heat will be sager and decrease the rate to happen accident. The new designed vacuum system will prevent the oil gas being back to cause accident.

Generally speaking,compared with the pyrolysis plant befor The 5th generation pyrolysis plant is more environmental friendly,safer,and energy saving.

plastic to fuel equipment

we are henna doing mechanical equipment co.ltd.we are professional manufacturer and supplier of plastic to fuel equipment.As we have done research in the plastic to fuel technology since 2005.we have proven that the plastic to oil equipment is efficient and stable.

Then we will have a generation introduction and the developing the of the plastic to fuel processor.

plastic to fuel equipment

The core technology of the plastic to fuel recycling processor is the process vessel with the ability to handle the accordingly amount of mixed polymer waste plastics that other recycling systems have to discard in landfills. This is the advantage of our plastic to fuel recycling machine.

On the other side the plastic to fuel equipment which is stylish designed by us can utilize lightly sorted and unwashed polymer stream, this design makes preparations of materials of less labor and capital intensive for operators. During the process of converting the waste to fuel oil. The process deconstruct hydrocarbon based materials, such as end life plastic and rubber, and converts it into new molecular structures that can be made into fuel such as crude oil which can be used as transportation fuels as  well as raw material for new polymer production.

Then the resulting product is processed using equipment that consists of various distillation and treatment stages that separate the liquid output into a variety of market ready fuel and aromatic components.

www.china-doing.com

The final product of the process is a kind of light, sweet liquid known as pygas which can be sold directly or further processed into diesel oil. And the by-product of the plastic to fuel plant include an inert char and a light non-condensable off-gas, the off gas will not pollute the environment for it can be used to heat the reactor itself. Thus minimal energy is required to run the reactor. So the plastic to fuel equipment is energy-saving and clear.there is no need to worry about the problem of pollution or the cost.

We continue pursuing improving the efficient of the plastic to fuel equipment and the quality of the crude oil generated.and try our best to reduce of the cost of the plastic to oil machine.we believe in the future the profits that the equipment brings will exceed your expections.